ConvertXtoVideo - Latest beta - 2.0.0.97 released!
Moderators: Maggie, ckhouston, JJ, Phil, alexia, Forum admin
Re: ConvertXtoVideo - latest beta version 2.0.0.83
New beta posted
2.0.0.83 hard crash
https://www.youtube.com/watch?v=Vq2Re99taFA
Steps to produce.
1. Load a few files.
2. In this case, I use Playon to download these files. For my own use of course.
3. I want to chop off a few seconds of the beginning of each file and at the end.
4. Convert X to Video 2.0082 hard crashes when I move the slide thingie around. Please watch the video at Youtube above.
It actually has been happening for the last few versions. This bug is unpredictable. It doesn't happen all the time, but when it happens, I lose what ever has been edited (before saving).
The blue boxes were added to cover some personal info (IP address, etc.)
Steps to produce.
1. Load a few files.
2. In this case, I use Playon to download these files. For my own use of course.
3. I want to chop off a few seconds of the beginning of each file and at the end.
4. Convert X to Video 2.0082 hard crashes when I move the slide thingie around. Please watch the video at Youtube above.
It actually has been happening for the last few versions. This bug is unpredictable. It doesn't happen all the time, but when it happens, I lose what ever has been edited (before saving).
The blue boxes were added to cover some personal info (IP address, etc.)
Re: 2.0.0.83 hard crash
Hi,wtin wrote:https://www.youtube.com/watch?v=Vq2Re99taFA
Steps to produce.
1. Load a few files.
2. In this case, I use Playon to download these files. For my own use of course.
3. I want to chop off a few seconds of the beginning of each file and at the end.
4. Convert X to Video 2.0082 hard crashes when I move the slide thingie around. Please watch the video at Youtube above.
It actually has been happening for the last few versions. This bug is unpredictable. It doesn't happen all the time, but when it happens, I lose what ever has been edited (before saving).
The blue boxes were added to cover some personal info (IP address, etc.)
Thanks for the heads up. Will be fixed in next build.
Latest beta version 2.0.0.83 - Only remuxing (bug)
Hi
I'm using my own user settings for conversion.
But while configuring settings, I don't want copy (remux) video codec, so I don't tick the box.
But settings are automacially reset to copy (remux). But like that it's not possible to change video settings in enhanced menu.
Please fix it.
Thanks and kind regards
mue.mat
I'm using my own user settings for conversion.
But while configuring settings, I don't want copy (remux) video codec, so I don't tick the box.
But settings are automacially reset to copy (remux). But like that it's not possible to change video settings in enhanced menu.
Please fix it.
Thanks and kind regards
mue.mat
Re: Latest beta version 2.0.0.83 - Only remuxing (bug)
Hi,mue.mat wrote:Hi
I'm using my own user settings for conversion.
But while configuring settings, I don't want copy (remux) video codec, so I don't tick the box.
But settings are automacially reset to copy (remux). But like that it's not possible to change video settings in enhanced menu.
Please fix it.
Thanks and kind regards
mue.mat
Please send bug report, I need the full profile and settings.
You need to launch a concersion that has the issue so I have all the data, the conversion does not need to fully complete.
BR,
Felicià
Re: ConvertXtoVideo - latest beta version 2.0.0.84
... new beta version works fine for me so far.
Thanks
mue.mat
Thanks
mue.mat
2.0.0.84 audio language
Program set to English audio. Loaded files and it shows "unspecified".
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Yes, bug confirmed, if in enhanced settings audio AND subtitles language isn't recognized automatically and you put manually the correct language, settings "keep" audio AND subtitles "unspecified".
Regards
mue.mat
Regards
mue.mat
2.0.0.84 bit rate incorrect
I think this was carried over from a couple of versions ago.
Steps to reproduce.
Load program.
Load a file (or more than one file).
Change profile to, say, Blu ray 1080p.
Under bitrate, it should be much higher than 3 or 4 MB per second.
Change profile to DVD.
Change it back to BR 1080p.
It is now correct.
Note: I set my bit rate (under hardware) to the max of 30,000,000. (I know, I like it big!!)
But it no longer crashes at random when I move the bar thing around. I am happy with this. :D
Steps to reproduce.
Load program.
Load a file (or more than one file).
Change profile to, say, Blu ray 1080p.
Under bitrate, it should be much higher than 3 or 4 MB per second.
Change profile to DVD.
Change it back to BR 1080p.
It is now correct.
Note: I set my bit rate (under hardware) to the max of 30,000,000. (I know, I like it big!!)
But it no longer crashes at random when I move the bar thing around. I am happy with this. :D
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Same here with spanish...mue.mat wrote:Yes, bug confirmed, if in enhanced settings audio AND subtitles language isn't recognized automatically and you put manually the correct language, settings "keep" audio AND subtitles "unspecified".
Regards
mue.mat
Re: ConvertXtoVideo - latest beta version 2.0.0.84
2.0.0.84 never remembers or selects "my" preferred languages - German / Deu in my case.
Default identifier in settings / conversion for audio & subtitle is also set to German.
Default identifier in settings / conversion for audio & subtitle is also set to German.
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Default identifier is only used when no language tag is found in the stream metadatadosibo51 wrote:2.0.0.84 never remembers or selects "my" preferred languages - German / Deu in my case.
Default identifier in settings / conversion for audio & subtitle is also set to German.
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Yes, but blu-ray converter ultimate remembers the languages I want for audio/subtitles - e.g. always German/deu in my case. CXV doesn't. Would be great to do the same here - maybe it was before and it's a new bug. I didn't use it for a longer time.felicia wrote:Default identifier is only used when no language tag is found in the stream metadatadosibo51 wrote:2.0.0.84 never remembers or selects "my" preferred languages - German / Deu in my case.
Default identifier in settings / conversion for audio & subtitle is also set to German.
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Hi,
CXV 2.0.0.84 shows 2 German with 1920x576 subtitle size but MediaInfo shows 1920x1080
CXV 2.0.0.84 shows 2 German with 1920x576 subtitle size but MediaInfo shows 1920x1080
Code: Select all
General
Unique ID : 127891816767014205742733149327966470282 (0x6037116585E262DCBD2FEA7C44BA008A)
Complete name : Der Herr Der Ringe 1 - Die Gefährten_(2001)_[FSK12]_[BR].mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 29.7 GiB
Duration : 2 h 58 min
Overall bit rate : 23.8 Mb/s
Writing application : Lavf56.30.100
Writing library : Lavf56.30.100
LABEL : Chapter 41
Language : eng
TCHAPTER : 201248000
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2 h 58 min
Bit rate : 22.9 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.461
Stream size : 28.5 GiB (96%)
Default : Yes
Forced : No
Track/Position : 0
Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 2 h 58 min
Bit rate mode : Constant
Bit rate : 448 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 572 MiB (2%)
Title : ac3 48000Hz 6Ch.
Language : German
Service kind : Complete Main
Default : Yes
Forced : No
Track/Position : 1
Text #1
ID : 3
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Title : hdmv_pgs_subtitle 1920x1080
Language : German
Default : Yes
Forced : No
Track/Position : 2
Text #2
ID : 4
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Title : hdmv_pgs_subtitle 1920x1080
Language : German
Default : Yes
Forced : No
Track/Position : 3
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Ooops, 2.0.0.84
see this - after converting no video in result file (file size 722 MB) .. and not the first time.
Source file:
Profile:
convert to H264 - max. 11.99 MB/s (less space on Linux SAT receiver for children), AC3
see this - after converting no video in result file (file size 722 MB) .. and not the first time.
Source file:
Code: Select all
General
Unique ID : 113864130327241353387057821349890943901 (0x55A96F0EC1214738EFF23DE98C7AEB9D)
Complete name : Der Herr Der Ringe 2 - Die Zwei Türme_(2002)_[FSK12]_[BR].mkv
Format : Matroska
Format version : Version 4 / Version 2
File size : 29.1 GiB
Duration : 2 h 59 min
Overall bit rate : 23.2 Mb/s
Writing application : Lavf56.30.100
Writing library : Lavf56.30.100
LABEL : Chapter 54
Language : eng
TCHAPTER : 212303648
Video
ID : 1
Format : VC-1
Format profile : Advanced@L3
Codec ID : V_MS/VFW/FOURCC / WVC1
Codec ID/Hint : Microsoft
Duration : 2 h 59 min
Bit rate : 22.3 Mb/s
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 (24000/1001) FPS
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Compression mode : Lossy
Bits/(Pixel*Frame) : 0.449
Stream size : 28.0 GiB (96%)
Default : Yes
Forced : No
Track/Position : 0
Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Codec ID : A_AC3
Duration : 2 h 59 min
Bit rate mode : Constant
Bit rate : 448 kb/s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 kHz
Frame rate : 31.250 FPS (1536 SPF)
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 575 MiB (2%)
Title : ac3 48000Hz 6Ch.
Language : German
Service kind : Complete Main
Default : Yes
Forced : No
Track/Position : 1
Text #1
ID : 3
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Title : hdmv_pgs_subtitle 1920x1080
Language : German
Default : Yes
Forced : No
Track/Position : 2
Text #2
ID : 4
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : Picture based subtitle format used on BDs/HD-DVDs
Title : hdmv_pgs_subtitle 1920x1080
Language : German
Default : Yes
Forced : No
Track/Position : 3
convert to H264 - max. 11.99 MB/s (less space on Linux SAT receiver for children), AC3
Code: Select all
---- Output profile informations ----
* Custom profile name: M2TS (H264, AC3, RX)
* File format (container): M2TS (Blu-ray)
* File extension: m2ts
* Output folder: L:\GRVD03\_Converted_
---- VIDEO track informations ----
Video stream will be encoded using these settings:
* codec: H.264 (Generic)
* framerate: Same as source (if compatible)
* width: Same as source (if compatible)
* height: Same as source (if compatible)
* aspect ratio: Fit on destination
* max bitrate: 11,99 Mb/s
---- AUDIO tracks informations ----
Audio streams will be encoded using these settings:
* codec: AC3 (ATSC A/52A)
* channels/bitrate: Same as source (if compatible)
* samplerate: Same as source (if compatible)Hz
---- SUBTITLE tracks informations ----
If possible, subtitle streams will be copied (remuxed).
Otherwise, they will be encoded using these settings:
* codec: Blu-ray Subtitle
-
- Posts: 55
- Joined: Fri Apr 12, 2013 7:43 am
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Why i can't lauch version 2 anymore?
"Exception EConvertError in module vsoVideoConverter.exe at 00027926.
'_' is not a valid integer value.
I am using Windows 8.
Previous version of ConvertX is OK, which is 1.6.0.47
"Exception EConvertError in module vsoVideoConverter.exe at 00027926.
'_' is not a valid integer value.
I am using Windows 8.
Previous version of ConvertX is OK, which is 1.6.0.47
Re: ConvertXtoVideo - latest beta version 2.0.0.84
Good morning. I'd like to make a feature request. I remember to see in previous versions of CX2DVD, when the conversion ended, we had in the bottom the time that the conversion took. If we notice, there are three places were is shown the percentage of conversion and remaining time. Can we have that feature?
Thanks in advance,
Roshi.
Thanks in advance,
Roshi.
Last edited by Roshi on Fri Jan 12, 2018 8:26 pm, edited 1 time in total.
Re: ConvertXtoVideo - latest beta version 2.0.0.84
As CxV can output mutiple files with each a diferent conversion time this information is not displayed in the main inteface, but can be retrieved in the log windowRoshi wrote:Good morning. I'd like to make a feature request. I remember to see in previous versions of CX2DVD, when the conversion ended, we had in the botton the time that the conversion took. If we notice, there are three places were is shown the percentage of conversion and remaining time. Can we have that feature?
Thanks in advane,
Roshi.
Re: ConvertXtoVideo - latest beta version 2.0.0.84
I understand that, but that info could be shown even if multiple files with diferent conversion times were converted, what was going to be shown was the total spent time, not the time for each file...felicia wrote:As CxV can output mutiple files with each a diferent conversion time this information is not displayed in the main inteface, but can be retrieved in the log windowRoshi wrote:Good morning. I'd like to make a feature request. I remember to see in previous versions of CX2DVD, when the conversion ended, we had in the botton the time that the conversion took. If we notice, there are three places were is shown the percentage of conversion and remaining time. Can we have that feature?
Thanks in advane,
Roshi.
Re: ConvertXtoVideo - latest beta version 2.0.0.85
New beta posted